Mastercam crash reporting 2018 free download. Crash or freeze when accessing File Open, Save, or Save As dialog boxes within Revit

Looking for:

Mastercam crash reporting 2018 free download –

Click here to Download


We often see issues that are resolved with updated video drivers. The driver version can have a great impact on how the card performs. We recommend using the automatic detect feature to detect which video card is installed. More information on configuring the graphics card can be found at this Mastercam knowledge base article. The majority of our internal systems utilize dual monitors and we find this to be more productive.

A second monitor allows applications such as Mastercam Simulator, Code Expert, Tool Manager and other applications to run on the secondary monitor while Mastercam utilizes the primary monitor.

Mastercam will run on lower resolution screens but beware of potential sizing issues with larger dialog boxes and panels which may be awkward to work with. Lower resolution monitors may work fine as a second monitor in a dual screen setup.

Mastercam will run on large format displays, including 4K monitors and high-DPI devices however, we do some display issues with these configurations. These drives are now priced at a point which makes them a good investment. Many of our test systems employ a smaller primary SSD for the OS and installed applications with a second large capacity conventional drive for data.

A 3D mouse improves the way you interact with your 3D application. It is designed to be used by your non-dominant hand in tandem with a standard mouse for a balanced and cooperative work style. Additional technical and purchase information can be found on the 3Dconnexion website. Most computers today have some kind of antivirus software to protect from unwanted malware. In some cases, these have been found to interfere with applications such as Mastercam which are running on the computer.

CNC Software does not recommend specific anti-virus products, but if you see unexpected issues, it may be a conflict with anti-virus software. Try temporarily disabling the anti-virus software or setting an exception for Mastercam. Our global community of Mastercam users, experts, educators, and enthusiasts helps you get the most from your investment. This site uses cookies to enhance your website experience. Video When purchasing a new computer for Mastercam, one of the most important areas is the video card.

Other graphics cards can be used, but they must offer full OpenGL 3. We do not recommend or support the use of onboard graphics found with some PC configurations.

These do not generally have the capability to drive graphics intensive applications such as Mastercam. Release new release report. Installation guide 1. Start the installer by running the launcher. Do not install the software in the end. If you already installed the USB-emulatot on your system for the Mastercam X5-X9, uninstall it and restart the system. Run the install. Run the installation of NHaspX. Run the HaspX. Has been. Run the software.

Install the update: 1. Download the offline update file separately. Install and apply updates from Update 1 to Update 3 , respectively. Download Crash Report Guide.

Download Crack Alone. Discuss this post. File password www. Tags CAM. Labels: CAM. No comments:. Newer Post Older Post Home. Subscribe to: Post Comments Atom. Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in. By Rstewart , November 12, in Industrial Forum. Ok, so for some weird reason every time I open X9 I get the MC has stopped working in about 5 seconds!

What can I do besides reinstalling? I’m the Only person that uses this rig and I am the Admin I haven’t made any major changes since yesterday? I have restarted my computer twice. If I have to reinstall, will someone refresh my mind on what all to save, like my config and tools. Thank you G, When I relocate my mcamx. At that point I get another crash report.

At this point I’m back to X8 I reckon. It’s been a while but I think your disc has a “repair install” that doesn’t affect your current settings. Can anyone verify this? MC did create a stock workspace file after I moved it. That fixed half of the problem will stay open now , but when I select my Machine mill instant crash report I’ll get with my dealer tomorrow.

I’ve been using Mastercam since X2 and never had anything happen like this before. The toolbars are different Ok, I think I may have misunderstood.

I do use the design workspace I was talking about when I choose a Machine I get the Crash


Mastercam crash reporting 2018 free download –


Choose the Delete button on the toolbar. You will see the menu shown in the following picture. The different options give you different ways of selecting what geometry you want to delete. Tip: To delete a single entity, click on it; you don’ t need to choose anything from the menu. Chain When you click on an entity, Mastercam automatically selects geometry that connects to it like a chain. Window Lets you select several entities by drawng a rectangle or polygon around them.

Choose Chain from the menu. Click anywhere on the rectangle. The whole rectangle highlights, telling you that it is selected. Choose Done. The rectangle is deleted. Choose the Undo button on the toolbar. The rectangle reappears. Tip: Choose the Undelete—Single button to make the rectangle reappear one segment at a time. Choose the Delete button again. This time, instead of choosing Chain from the menu, click on the rectangle. Without chaining, Mastercam only selects one line at a time.

Delete the remaining lines. Using Help to learn about rectangle options 1. Choose Main Menu, Create, Rectangle. You can see the three options on the menu: 1 point, 2 point, and Options. Choose the Help button on the toolbar to learn more about them. The following help screen displays.

Every time you choose the Help button while a menu is active, you get a topic about that menu. Read through the topic to learn about the different kinds of rectangle-related shapes you can create. The help topic also gives you links to instructions for specific procedures and related topics. Close the Help window. Choose this to see the Table of Contents for the entire help system. Choose this tab to search the index.

Choose this tab to search the help system. The currently displayed topic is highlighted. Click on any other topic in the Table of Contents to read about it. You will create a new rectangle with these options. Choose Options from the menu. Select the Corner Fillets—On check box and enter a Radius of Select the Create Center Point check box. Your dialog box should match the following picture. Choose the button on the title bar of the dialog box and notice how the cursor changes shape. Click on one of the fields in the dialog box and you will see a short description of what it does.

This “What’s This” help is available on almost every dialog box in Mastercam. Use it whenever you need a quick explanation of what a dialog box option does or means. Choose OK to close the dialog box. Choose 1 point from the menu. Enter the values shown in the following picture and choose OK.

Move the cursor over the point you created earlier until it is highlighted. Click to place the rectangle. Press [Esc]. You can see the rounded corners and center point that were automatically added. Using AutoSave to quickly save your work 1. Choose OK to quickly save the file with the same name and in the same location.

This will overwrite whatever version is already saved to disk. Tip: You can choose the Active checkbox and type in a time interval. Mastercam will then automatically save your work at the set times.

Choose Yes to confirm the overwrite. Now that you’ve seen how to get around in Mastercam, you’re ready to create your first part. The next chapter will show you how to use Mastercam’s design features to draft a part from a blueprint. Then, you’ll create a complete operation to machine it. You will create a basic 2D part and cut it with a contour toolpath.

Exercise 1 — Designing the part This exercise introduces you to some basic drawing functions. You will learn the following skills: Creating a new file Creating points, lines, arcs, and fillets Mirroring and rotating lines Trimming lines and arcs The following blueprint shows the part you will create. Choose Main Menu, File, New.

Choose Yes when prompted to create a new drawing. If the current file has had any changes made to it since the last time it was saved, you will be asked whether or not you wish to save it. Choose Yes again if you wish to save it. Creating construction guides The first step is to create some construction guides to properly locate and orient the drawing.

Create the center point of the elbow. Enter the coordinates 75, As soon as you start typing, the numbers will appear in the prompt area. Tip: Press [Enter] after entering the number s in the prompt area. Choose the Screen—Fit button on the toolbar to center the point in the graphics window. Next, draw the center lines for the two arms.

Click on the point to select it as an endpoint. Tip: Pass the cursor over the point. When a square displays, click the mouse button. In the prompt area, enter an angle of 0. Enter a line length of The guide for the horizontal arm appears. Mastercam automatically prompts you to select an endpoint for another polar line. Click on the same point as in step 5. Enter an angle of Press [F9] to show the construction origin and XY axes. The part should look like the following picture. Press [F9] again to clear the axes from the screen.

Drawing the arcs Use arcs to create the curved ends and outside bend of the part. Select the center point for the first arc. Click on the line endpoint at position 1, as shown in the picture to the right. Type the radius of the arc: 16 4. Specify the approximate ending positions of the arc. Click at position 2 then at position 3. Repeat steps 2 through 4 to create the second and third arcs. Click on points 4, 5, 6 and 7, 8, 9 to create the other arcs. If necessary, choose the Screen—Fit button again to fit the part completely in the screen.

It should look like the following picture: Rotating lines to create the arms To create the outside edges of the arms, you will rotate the center line guides you created earlier. Choose Main Menu, Xform, Rotate.

Select the line at position 1. Select the endpoint at position 2. Enter the values shown on the following dialog box and choose OK. Select the line at position 3. Tip: Instead of choosing menu items with the mouse, you can type the shortcut letter.

For each item on the menu, the shortcut letter is underlined. Select the line endpoint at position 4. Whenever you do a Xform operation, Mastercam changes the colors of the original geometry and the new geometry so you can clearly see the results of the operation. Choose the Screen-Clear colors button on the toolbar to return the lines to their original color. Moving the lines to the proper position You’ve created the lines at the proper angle and orientation.

Now, you need to move them to the proper position tangent to the arcs. Select the arc at position 2. Mastercam shows you two possible lines.

Click on the bottom line to keep it. To create the second line, select the line at position 3. Select the arc at position 2 again. Click on the left line to keep it. Click on lines 1 and 2 as shown in the following picture to delete them. Finally, create the other side of the arms by mirroring the lines around the construction guides. Choose Main Menu, Xform, Mirror.

Select the line at position 2. Choose Copy and OK from the Mirror dialog box. Repeat steps 11 through 14 for lines 3 and 4. Clear the screen colors.

Creating the fillets Create fillets to join the lines and arcs. You will also see how Mastercam can automatically trim lines to the base of the fillets. Complete the part by deleting the remaining construction guides. Enter the fillet radius: 10 4 2 1 3 Select the line at position 1 and the arc at position 2. The fillet should look like the following picture.

Select the lines and arcs in the order shown in the following picture to create the remaining fillets. The part should look like the following picture when you are done. Trim the last arc to the adjoining lines. Choose Main Menu, Modify, Trim, 3 entities.

Select the lines at positions 1 and 2, then the arc at position 3. Delete the lines at positions 4 and 5. Delete the point at position 6. The completed part should look like the following picture. Save the file as elbow1. Exercise 2 — Creating the contour toolpath This exercise shows you the basic steps for creating a toolpath and posting it to an NC file that can be read by your machine tool. In this exercise, you will create a contour toolpath. In a contour toolpath, the tool follows the shape of a curve or chain of curves.

You will use the part you created in Exercise 1. In this exercise, you will learn the following skills: Creating a contour toolpath Chaining geometry Choosing a tool and setting toolpath parameters Selecting a tool library Using the backplot function to preview a toolpath Posting the toolpath to an NC file A toolpath can have more than one chain.

If necessary, open the file from the previous exercise, elbow1. Choose Main Menu, Toolpaths, Contour. Select the line at position 1 to start the chain. You should see the whole part highlight. To help you select the right geometry, Mastercam highlights the line when the cursor is close to it. After selecting the line properly, you will see an arrow display as shown in the following picture.

Selecting a tool As soon as you finish selecting geometry for the toolpath, Mastercam automatically prompts you to select a tool and enter parameters. Each toolpath can use only one tool. Mastercam organizes tool definitions into libraries. You can have as many libraries as you wish.

In this procedure, you will also learn how to select a different tool library. Mastercam automatically shows you the Tool parameters tab. Right-click in the large white area and choose Get tool from library as shown in the following picture.

Right-click in the tool list and choose Change library. Tip: The arrow indicates the chaining direction. This is the direction the tool will move when you create the toolpath. Select the file MetricST Select the 12 mm HSS high-speed steel flat endmill as shown in the following picture. The tool appears in the tool display area as shown in the following picture.

For this toolpath, you will use the default values for all the Tool parameters, and edit the Contour parameters. Choose the Contour parameters tab. Enter a Retract height of Enter a Feed plane of 2. Enter a Depth of — Make sure your other parameters match the following picture. Rapid straight down to 2 mm above the stock the Feed plane. Because the feed plane is set to 2 mm above the part, the total plunge distance is 12 mm.

Because the compensation is set to Left, the tool will be offset from the part geometry by its radius, 6 mm. To install: Click on the mastercam-monitor. This utility will install the Mastercam Activation Wizard. The program allows the activation of Mastercam products using an activation code. If you receive this, download this file. To install: Download mastercamx9-b1-codemeter-plugin. Start CodeMeter by clicking on the icon in your taskbar.

Overwrite the existing files. Powerful Mill-Turn additions Crisper simulation and full fixture support. Mastercam This release features a new functionality focused on delivering speed and efficiency to your machining jobs. Stock awareness has been added to select 2D toolpaths.

Add or remove finish cuts based on the number of rough depth cuts specified on the Depth Cuts page. Chip Break is now available for Face and Finish Toolpaths when chip breaks occur.

Mill-Turn machine definitions now contain tailstock and quill components. The new Tailstock Operation allows you to define how the machine’s tailstock is being used. Angle Sweep improves the creation of more complex wireframe functions, and when creating or editing primitives, there are now on-screen sweep and rotate controls that can snap to the existing AutoCursor positions.

Seam Control allows you to visually rotate a seam to see how geometry will respond, as well as snap to AutoCursor positions. The Hole Axis makes it easier to work with a large number of holes. Also available in the Mastercam release are the following features: – A new set of turning strategies that automates toolpath generation and support for Sandvik Coromant CoroTurn Prime inserters and PrimeTurning method.

Streamlined workflow with improved plane management, level and geometry control, toolpath analysis and more. OS : Minimum: Windows 7, 8. More information: Operating Systems CNC Software Continues to review the operating system OS requirements for Mastercam with a view to providing the best possible user experience for our customers.

We recommend using Windows 7, 8. While Mastercam can run on other Windows versions such as Home Edition or virtual environments such as Parallels for Mac , it has not been tested on these configurations and therefore is not supported. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site.

Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. English Original X. View Original X. By: Support.

Support 0 contributions. Issue: Revit successfully launches, but when clicking the Open, Save or Save As command, the program crashes or freezes.


– Mastercam crash reporting 2018 free download

Datum features do. The operations should look like the following picture.


Leave a Reply

Your email address will not be published. Required fields are marked *